IL SEMBLE QUE VOUS UTILISEZ ADBLOC POUR BLOQUER LA PUBLICITÉ, AUCUNE PUB INTRUSIVE SUR FDZ ET PAS DE POPUP
FDZ EST GRATUIT DONC MERCI DE DÉSACTIVER VOTRE ADBLOCK ET DE BIEN VOULOIR PARTICIPER ET JOUER LE JEU


PAR SUITE D'ABUS LES SERVEURS CCCAM ET ABONNEMENT NE SONT PAS TOLÉRÉS SUR LE FORUM

Affichage des résultats 1 à 6 sur 6
Share |

Discussion: Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM500HD,.

  1. #1
    Date d'inscription
    novembre 2014
    Messages
    36
    Remerciements
    1
    Remercié 1 fois dans 1 message
    Pouvoir de réputation
    0

    Par défaut Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM500HD,.

    Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM500HD, DM8000HD.

    1278.jpg

    Liens pour :

    - DM800HD : http://www.ourdreambox.com/ubbthread...=2294#Post2294
    - DM800HDse : http://www.ourdreambox.com/ubbthread...=1940#Post1940
    - DM500HD : http://www.ourdreambox.com/ubbthread...=1938#Post1938
    - DM8000HD : http://www.ourdreambox.com/ubbthread...=1939#Post1939

    1570.jpg

    Merci Japhar Team pour cette superbe image, et un IPTV nickel (changement de chaines en 3 secondes en IPTV, et auto-adaptation du flux au meilleur rendement/qualité en fonction de votre ligne internet !)

    TS

  2. #2
    Date d'inscription
    novembre 2014
    Messages
    36
    Remerciements
    1
    Remercié 1 fois dans 1 message
    Pouvoir de réputation
    0

  3. #3
    Date d'inscription
    novembre 2014
    Messages
    36
    Remerciements
    1
    Remercié 1 fois dans 1 message
    Pouvoir de réputation
    0

    Par défaut Re : Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM50

    - Gstreamer 1.6.x has been updated
    - Newer gstreamer 1.6.x master git snapshot:
    They've pretty much reworked HLS (m3u8) handling completely.
    There should be no more jumps when switching bitrates.
    - DTS Downmix should now be working on the dm800se, dm500hd and dm8000.
    Also pausing the video should work now (untested).
    - Fragmented streams work now (m3u8)
    - Remote control delay is now set by default to 300ms
    - Feeds online for online update of image and future updates/fixes if necessary.
    - Improved streaming performance in both the dvbmediasink and enigma2, Dreambox fixes for the dvbmediasink:
    Framerate and resolution should now be handled correctly.
    - Fragmented streams should now play more smooth and give less freezes due to async changes.
    - IPTV List and JAM 5.2 Panel are now pre-shipped.
    - Japhar Addon Manager 5.2 included.
    - IPTV List built-in with 800+ IPTV FREE Channels.






    - DM800HD : https://mega.nz/#!1BFBHJiQ!Y3OBOTtf4...k3AQqweQwcW7RQ


    - DM800HDse : https://mega.nz/#!BJcA2ZgJ!cUYHK6RCn...i4KULjojgP9GgI


    - DM500HD : https://mega.nz/#!RZ1FiArQ!qO6MS-72Z...vLe_0oONMw48vI


    - DM8000HD : https://mega.nz/#!EY13zT4Z!8z0HFTcis...g5wpBTsX_GPQ_s

  4. #4
    Date d'inscription
    décembre 2015
    Messages
    3
    Remerciements
    0
    Remercié 0 fois dans 0 messages
    Pouvoir de réputation
    0

    Par défaut Re : Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM50

    Merci les info, c'est un boulot pas facile coque xperia m4 Aqua etui sony xperia m4 Aqua
    Dernière modification par Leopold ; 14/12/2015 à 02h47.

  5. #5
    Date d'inscription
    novembre 2014
    Messages
    36
    Remerciements
    1
    Remercié 1 fois dans 1 message
    Pouvoir de réputation
    0

    Par défaut Re : Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM50

    VU : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team


    Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!


    Changes since previous release:


    - mx3L's gstreamer revert which fixes mp4 playback from remote locations
    - Spark drivers updated to 20151113
    - Using aio-grab from oe-alliance which includes fixes for sprak receivers
    - New Japhar IPTV List (thanks to ToySoft).
    - DM8000 has no more gsod's now (thanks to ToySoft for testing!)


    Changes compared to openpli-oe-core gst-1:


    - Ships with gstreamer upstream master git:
    Using the same patches as openpli-oe-core gst-1 with only these changes:
    Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
    because this patch was already checked in upstream.
    Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
    By mx3L which fixes mp4 playback from remote locations.
    - Every receiver uses christophecvr's multibox dvbmediasink.
    - Using libtrmp and rtmpdump from oe-alliance.
    - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
    These are only applied for Dreambox receivers.
    - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
    - IPTV Player from samsamsam included (thx to Athoik for the recipe).
    - Large list of public IPTV streams included thanks to the Japhar Team.
    - Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
    - DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
    added si2166b blindscan support
    - Spark images includes the pti.ko from OpenATV so softcam's should work now.
    - Using aio-grab source from oe-alliance which includes fixes for spark receivers.
    - The 2.6.18 kernel will now always pass the vermagic check when loading modules.
    Now you can try and load any kernel driver from OE1.5 to 2.0.


    Known issues:


    - DM800 first boot will take a while, please be patient. The next boot will be faster.
    - On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
    We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
    - On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
    Because sometimes it doesn't scale back to fullscreen.
    I've included the MX-HQ7 skin for use as workaround.
    - On Zgemma Star you cannot use fullHD skins.
    This is a hardware/driver limitation.
    Please don't try it, it will crash enigma2.
    - Some Dreambox remotes behave very sensitive.
    This causes button presses to register multiple times instead of just once.
    As a workaround you can adjust the key interval:
    Go to: Menu - System - Input devices - dreambox remote control (native).
    Set "Change repeat and delay settings" to yes
    Set "Interval between keys when repeating:" to 200ms or 300ms.
    Press green button (OK)
    Now set the same delay for: "dreambox advanced remote control (native)" as well.


    To find the download link, search for MastaG Japhar OpenPLi 4.0


    Enjoy !

  6. #6
    Date d'inscription
    novembre 2014
    Messages
    36
    Remerciements
    1
    Remercié 1 fois dans 1 message
    Pouvoir de réputation
    0

    Par défaut Re : Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM50

    OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)


    Cliquer ici pour agrandir


    Changes:
    - Gstreamer 1.8.0 stable release
    - New PLi spring logo
    - Upgrade OpenVPN to 2.3.8
    - Upgrade OpenSSH to 7.1p2
    - Upgrade OpenSSL to 1.0.2g
    - Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
    - Upgrade Japhar-IPTV list to 1.6
    - Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
    - Upgrade ffmpeg to 3.0.1
    - Patch for dvbmediasink from mx3L for writing PTS on every PES header
    This could possible fix some m3u8 streams freezing
    - Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
    Since I couldn't reproduce the problem
    - Rewrote Dreambox kernel recipes which should fix certain models not booting
    - Fixed CrossEPG
    - Fixed very large Packages.gz on the server
    - Merged latest openpli-oe-core changes
    - Merged latest OpenPLi enigma2 changes
    - Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
    Emulating PowerVU should now work for multiple pids
    - Lots of stuff I forgot...


    DM800HD+ : https://mega.nz/#!sU13mAxI!J0Av9B6D7...v3cMRAsDyANDWY
    DM500HD+ : https://mega.nz/#!NR0hHKhT!fX5cI-pgR...kxX59yZW9wVG4o
    DM800HDse+ : https://mega.nz/#!MENwRaDb!AsZrkisSZ...xNqWFWFnzz0gLA
    DM8000HD+ : https://mega.nz/#!cZcWyBzL!wQiPAfzzL...9Togml5GgiOM54

Liens sociaux

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •  
[Auto utilitaire DZ] [Webimag] [Algérie Info] [Guide Algérie] [Mosquée ALBADR MEAUX] [Photographe MARIAGE]

is PageRank Checking Icon