toysoft

La SD est possible même sur des lignes 2 Mbps, mais pour l'HD c'est plus problèmatique oui, même si beaucoup de chaines ont un downgrade et donc peuvent passer en SD, c'est là l'intérêt de GStreamer 1.9.x qui gère ce downgrade automatique comme le font les vrais lecteurs IPTV. Avec des tests, nous sommes arriver à avoir l'IPTV avec 1.8 Mbps en Italie, donc on ne pourra pas tout voir, mais il y aura des streams qui passeront. TS

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016) Changes: - Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr: * Proper fix for HLS segfault on stop * Re-enable the rtmp seeking and potential segfault fix * gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) * * dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance - FFMpeg updated to 3.0.2 and is now installed by default * - Backports to enigma2 for sh4 (mainly servicemp3.cpp related) - Fix EPG on sh4 receivers - exteplayer3 is now installed by default, thank you mx3L and samsamsam * - gstplayer is now installed by default, thank you mx3L and samsamsam - Mediatomb is now in the feeds - MediaPlayer2 is now installed by default, thank you mx3L - SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L - No more russian tuxtxt - Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr - Latest enigma2 changes, thank you OpenPLi - latest openpli-oe-core changes, thank you OpenPLi - ServiceApp, thank you mx3L !!! Known issues: - On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot. This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet. It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change. Configure your streams to play with exteplayer3 instead, read below. - * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg. This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg. See my attached guide to copy over the root filesystem to a storage device. - Some Dreambox remotes may behave very sensitive. This causes button presses to register multiple times instead of just once. As a workaround you can adjust the key interval: Go to: Menu - System - Input devices - dreambox remote control (native). Set "Change repeat and delay settings" to yes Set "Interval between keys when repeating:" to 200ms or 300ms. Press green button (OK) Now set the same delay for: "dreambox advanced remote control (native)" as well. - DM800 first boot will take a while, please be patient. The next boot will be faster. Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink. Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink. For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16) Changes: - Gstreamer 1.8.0 stable release - New PLi spring logo - Upgrade OpenVPN to 2.3.8 - Upgrade OpenSSH to 7.1p2 - Upgrade OpenSSL to 1.0.2g - Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore - Upgrade Japhar-IPTV list to 1.6 - Upgrade rtmpdump from oe-alliance and let it provide librtmp as well - Upgrade ffmpeg to 3.0.1 - Patch for dvbmediasink from mx3L for writing PTS on every PES header This could possible fix some m3u8 streams freezing - Removed the patch for dvbmediasink which should fix seeking in some mp4 streams Since I couldn't reproduce the problem - Rewrote Dreambox kernel recipes which should fix certain models not booting - Fixed CrossEPG - Fixed very large Packages.gz on the server - Merged latest openpli-oe-core changes - Merged latest OpenPLi enigma2 changes - Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch Emulating PowerVU should now work for multiple pids - Lots of stuff I forgot... DM800HD+ : https://mega.nz/#!sU13mAxI!J0Av9B6D7rDUqZ51x8updgSleuViiv3cMRAsDyANDWY DM500HD+ : https://mega.nz/#!NR0hHKhT!fX5cI-pgR3t25JXxhQenUmPRqA6PCkxX59yZW9wVG4o DM800HDse+ : https://mega.nz/#!MENwRaDb!AsZrkisSZa0ewrbz13BzZbsVfuXBhxNqWFWFnzz0gLA DM8000HD+ : https://mega.nz/#!cZcWyBzL!wQiPAfzzLwwLHngU0-2qXmlr7o4y99Togml5GgiOM54

L'OpenPLi 4.0 n'existe pas pour DM800HD originale, seulement pour clone. La solution c'est upgrade del la sim vers par exemple Japhar, et mettre la OpenPli 4.0 IPTV Japhar. Voir ici, pour originale seulement la OpenPli 2.1 existe : http://openpli.org/download/dreambox/dm800/ TS

VU : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update! Changes since previous release: - mx3L's gstreamer revert which fixes mp4 playback from remote locations - Spark drivers updated to 20151113 - Using aio-grab from oe-alliance which includes fixes for sprak receivers - New Japhar IPTV List (thanks to ToySoft). - DM8000 has no more gsod's now (thanks to ToySoft for testing!) Changes compared to openpli-oe-core gst-1: - Ships with gstreamer upstream master git: Using the same patches as openpli-oe-core gst-1 with only these changes: Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch because this patch was already checked in upstream. Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch By mx3L which fixes mp4 playback from remote locations. - Every receiver uses christophecvr's multibox dvbmediasink. - Using libtrmp and rtmpdump from oe-alliance. - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support). These are only applied for Dreambox receivers. - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu). - IPTV Player from samsamsam included (thx to Athoik for the recipe). - Large list of public IPTV streams included thanks to the Japhar Team. - Updated libcdio and cdtextinfo for audio-cd support by christophecvr. - DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201: added si2166b blindscan support - Spark images includes the pti.ko from OpenATV so softcam's should work now. - Using aio-grab source from oe-alliance which includes fixes for spark receivers. - The 2.6.18 kernel will now always pass the vermagic check when loading modules. Now you can try and load any kernel driver from OE1.5 to 2.0. Known issues: - DM800 first boot will take a while, please be patient. The next boot will be faster. - On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi. We're using the OE-A drivers and 'duckbox' doesn't seem to work on these. - On spark/spark7162 you need to set a skin which doesn't resize the framebuffer. Because sometimes it doesn't scale back to fullscreen. I've included the MX-HQ7 skin for use as workaround. - On Zgemma Star you cannot use fullHD skins. This is a hardware/driver limitation. Please don't try it, it will crash enigma2. - Some Dreambox remotes behave very sensitive. This causes button presses to register multiple times instead of just once. As a workaround you can adjust the key interval: Go to: Menu - System - Input devices - dreambox remote control (native). Set "Change repeat and delay settings" to yes Set "Interval between keys when repeating:" to 200ms or 300ms. Press green button (OK) Now set the same delay for: "dreambox advanced remote control (native)" as well. To find the download link, search for MastaG Japhar OpenPLi 4.0 Enjoy !

- Gstreamer 1.6.x has been updated - Newer gstreamer 1.6.x master git snapshot: They've pretty much reworked HLS (m3u8) handling completely. There should be no more jumps when switching bitrates. - DTS Downmix should now be working on the dm800se, dm500hd and dm8000. Also pausing the video should work now (untested). - Fragmented streams work now (m3u8) - Remote control delay is now set by default to 300ms - Feeds online for online update of image and future updates/fixes if necessary. - Improved streaming performance in both the dvbmediasink and enigma2, Dreambox fixes for the dvbmediasink: Framerate and resolution should now be handled correctly. - Fragmented streams should now play more smooth and give less freezes due to async changes. - IPTV List and JAM 5.2 Panel are now pre-shipped. - Japhar Addon Manager 5.2 included. - IPTV List built-in with 800+ IPTV FREE Channels. - DM800HD : https://mega.nz/#!1BFBHJiQ!Y3OBOTtf4oerePSxbBlIKAw8nkTE8k3AQqweQwcW7RQ - DM800HDse : https://mega.nz/#!BJcA2ZgJ!cUYHK6RCnwisa5ygrDZfauXVlJlWxi4KULjojgP9GgI - DM500HD : https://mega.nz/#!RZ1FiArQ!qO6MS-72ZkLPN4LU_UzrgaOrMs7VyvLe_0oONMw48vI - DM8000HD : https://mega.nz/#!EY13zT4Z!8z0HFTcistm650DJy3AA3yzYtjB8Hg5wpBTsX_GPQ_s

Nouveaux liens, DM800HD : https://mega.nz/#!UZszUSaR!DbtsgxVYF3sAQDVik7DUZU9LD-0ykdpHguDRZKMA0_0 DM800HDse : https://mega.nz/#!1NNDAbbS!QCa_Dpz0btgcSnsfWGLsyPdXLHahMjWS1USC15vfHFY DM500HD : https://mega.nz/#!xUEg1BIA!WjfnI5Y9dBkbMIy8YvRl2btEP1RdH6CeOl_QgrWJAo0 DM8000HD : https://mega.nz/#!dYc0TbKb!6TbijpRpNchwH0tC4rTG0cH1BSGbYQwyJWd7GAwZMfw Enjoy ! TS

Utilises le JapharFlasher, c'est comme DreamUp mais fonctionne avec toute sim et tout clone/original DM, TS

Clone DM (8000, 800se ou 500hd) TS

Nouvelles images OpenPLi 4.0 avec 700 chaines IPTV pour DM800HD, DM800HDse, DM500HD, DM8000HD. Liens pour : - DM800HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2294#Post2294 - DM800HDse : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1940#Post1940 - DM500HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1938#Post1938 - DM8000HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1939#Post1939 Merci Japhar Team pour cette superbe image, et un IPTV nickel (changement de chaines en 3 secondes en IPTV, et auto-adaptation du flux au meilleur rendement/qualité en fonction de votre ligne internet !) TS