Aller au contenu
Règlement du forum ×
IPTV et arnaques ×

Dreambox 500 Originale


Lemrid

Messages recommandés

  • Réponses 79
  • Created
  • Dernière réponse

Top Posters In This Topic

  • 1 month later...

mon frere je suis desole mais l essenssiel c est qu il ai pas de perte humaine le reste sa rempacera iol faut du courage et la determination de sorte que sa soit comme du reculer pour mieux sauter

 

moi je propose a se qu une colecte benevole soit efectuer par la communaute du forumdz pour nos amis de bechar

je suis partant pour une participation financiere je demande a l admin du forum de cree un topic en se sens

Lien vers le commentaire
Partager sur d’autres sites

  • 1 month later...

Lu,

 

 

En exclusivité

 

Liste de Prix : 18 Oct

 

- Server Inclus (abonnement 1 année)

- Prix détail, revendeur 10pcs (- 5%)

- Livraison dans la wilaya la plus proche.

 

Dreambox 100 : 23.000 DA

 

http://forum.dreamworld-dz.com/viewtopic.php?f=91&t=216

DM100.jpg

MPEG-2 hardware decoding
2 x LED - status
1 x Smartcard-Reader
1 x Scart
1 x S-Video
10/100Mbit compatible Ethernet Interface
USB-B
S/PDIF Interface for digital bit stream out (AC-3)
unlimited channel lists for TV/Radio

channel-change time full automatic service scan
directly bouquet-lists
EPG (electronic program guide)
own videotext and subtitle
multiple LNB-Switching control (DiSEqC)
fully adaptable OSD in many languages
Picture in Picture (PIP) and Picture in graphics (PIG)
Zoom function

DreamBox DM100 technical data DBS-Tuner:

Frequency Range 950 …. 2150 MHz
Signal Level - 65 dBm …. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk 
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB

USB:
USB 1.22:
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface

LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-protected
LNB Voltage vertical  11,5V at 400mA
LNB Voltage horizontal  17,3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption:

Input voltage:
DC12V +/- 15%

Extern power supply:
Input: 110-240V AC / 50-60Hz / 0,6A
Output: 12V = / 1A or 2A

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity Size (W x D x H): 195 mm x 130 mm x 30 mm
Weight: 540 g

 

Dreambox 600 PVR : 39.000 DA

http://forum.dreamworld-dz.com/viewtopic.php?f=75&t=78

DM600.jpg

 

- 250 MHz PowerPC Processor
- Linux Operating System
- 2 LED status
- MPEG-2 Hardware decoding
- Common available NIMs (DVB-S, DVB-C, DVB-T)
- Tuner modules, Plug&Play
- 1 x Smartcard-Reader
- V.24/RS232 Interface
- 10/100Mbit compatible Ethernet Interface
- 1 x Scart-interfaces (RGB, FBAS or S-Video)
- S-Video connector
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 32 MByte Flash, 96 MByte Ram
- integrated IDE Interface
- Support for internal HDD 2,5" in any capacity

- unlimited channel lists for TV/Radio
- channel-change time - automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- Videotext Decoder
- multiple LNB-Switching control (DiSEqC)
- OSD in many languages and skin-support
- extern12V power supply

DreamBox DM600 technical data

DBS-Tuner:
Frequency Range 950 …. 2150 MHz
Signal Level - 65 dBm …. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk 
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

IDE Interface:
Intern for connect 2,5" HDD

LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-protected
LNB Voltage vertical  11,5V at 400mA
LNB Voltage horizontal  17,3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption:

Input voltage:
DC12V +/- 15%

Extern power supply:
Input: 110-240V AC / 50-60Hz / 0,6A
Output: 12V = / 2A

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity Size (W x D x H): 195 mm x 130 mm x 40 mm
Weight: 0,6 kg

 

Dreambox 800 HD : 63.000 DA

 

http://forum.dreamworld-dz.com/viewforum.php?f=92

DM800.jpg

- 300 MHz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG-2 / H.264 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V.24/RS232 Interface
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- DVI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 64 MByte Flash, 256 MByte RAM
- SATA
  - for use either as internal SATA HDD 2,5“
  - or to use for extern eSATA

- unlimited channel lists for TV/Radio
- channel-change time - automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder
- extern 12V power supply

DreamBox DM800 technical data

DBS-Tuner mit DVB-S2:

Frequency Range  950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk 
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

Analoge modem:
analoge modem for Internet connection

SATA Interface:
  - for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD

USB
2 x USB 2.0 Host

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical  11,5V at 400mA
LNB Voltage horizontal  17,3V at 400mA

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption:

External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity Size (W x D x H): 195 mm x 140 mm x 40 mm
Weight: 1,8 kg  without HDD

Modifié par Lemrid
Lien vers le commentaire
Partager sur d’autres sites

Lu,

 

@lalim92

 

Oui c'est possible de la connecter en Wifi via un AP :) mais malheureusement impossible via un dongle USB :(

 

@mouzak_dz

 

Il faut prendre en consideration deux choses :

 

les prix annoncé comprennent deux choses qui les justifient :

 

Primo: c'est des prix en dinars et le plus important c'est disponible ICI en algérie (faut pas oublier les frais de port, dédouanement ....)

 

secundo: L'acces server est gratuit et garanti durant une année. Le server assure pas mal de cerises, ailleurs cet acces est facturé au min 100 € ;)

 

@Saladin

 

j'ai pas compris l'opération arithmétique, mais bon, merçi de ton objectivité :)

Lien vers le commentaire
Partager sur d’autres sites

@Saladin

 

j'ai pas compris l'opération arithmétique, mais bon, merçi de ton objectivité :)

 

salam,

 

:p bah j'ai mis des "?" du coté resultat pour que mouzak puisse calculé et comparer avec les prix qu'il a donner !

 

sinon quand tu dis "Wifi via un AP" : tu veut dire que ce n'est pas possible de ce connecter en had-oc ? cad juste en mode "structure" ?

 

le Dreambox 100 : linux OS ou pas ?

 

et est ce que oran est parmis les wilaya "plus proche" pour une livraison ?

 

merci et a+

Lien vers le commentaire
Partager sur d’autres sites

Lu,

 

AH Ok je comprend now ;)

 

Via un AP veut dire que c'est l'AP qui gère le mode de connexion (client infra, adhoc, WDS ...) La dm se connectera à l'AP via du RG45.

 

J'ai déjà installé des DM avec de telles contraintes en adoptant la solution suivante :

 

Dreambox connectée à un Modem router WIFI (assbox, thomson, linksys, dlink) via cable reseau, PC(s) connectés soit via WIFI soit via RG45 au router. Ceci permet d'avoir le modem à côté de la dream au cas où il faut le redémarrer vu la qualité de notre ADSL.

 

La dm100 est avec OS propriétaire donc pas de linux, quoique vu que cet OS est développé par DMM donc ;)

 

Oran est livrable en 8H :)

Lien vers le commentaire
Partager sur d’autres sites

Lu,

 

@Zving

 

Les 500 chinoises sont à 25.000 DA, quoiqu'on ne conseille plus les clones puisque fiabilité très aléatoire.

 

@didiss

Oui, la redir des ports fonctionne sous speedtouch en méttant la DM en DMZ, (seule soluce fiable et stable avec ce router)

Lien vers le commentaire
Partager sur d’autres sites

Oui, la redir des ports fonctionne sous speedtouch en méttant la DM en DMZ, (seule soluce fiable et stable avec ce router)

une explication svp

Lu,

 

google donne :

 

http://www.speedtouch.net.nz/forum/topic.asp?TOPIC_ID=430

 

http://forums.whirlpool.net.au/forum-replies-archive.cfm/689342.html

 

http://www.speedtouch.net.nz/500PublicIPpassthrough_R4.3.htm

Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.


  • Messages

    • Je sais, je n’ai pas dit que j’étais spécial , c’est juste bizarre qu’ils distribuent des modems  alors que d’autres attendent pendant des mois.
    • @hotsauce3 ils font ca depuis des années...partout en algerie....
    • C’est bizarre : dans mon quartier, ils ont installé un chapiteau pour inciter les gens à s’inscrire à la fibre et à recevoir leur modem directement sur place, et ils ont commencé les raccordements à domicile.
    • @hopdedikayhan https://www.arpce.dz/fr/claim ou leur page facebook via messagerie privée : https://www.facebook.com/AlgerieTelecom Vous pouvez trouver des modem fibre sur ouedkniss : https://www.ouedkniss.com/modems-routeurs-modem-fibre-algerie-telecom-bir-el-djir-oran-d45618413
    • As pet parenting becomes a beloved lifestyle choice for more families, ensuring feline friends stay comfortable and well - groomed is a top priority. This is where a China Pet Hair Scraper , especially one crafted with care like Tallfly’s offering, steps in as a game - changer. For cat owners tired of struggling with inefficient tools or worrying about accidental nicks during grooming, the right scraper transforms a stressful chore into a bonding experience. Cats are notoriously particular about their grooming routines, and their delicate skin and fur demand tools that balance effectiveness with safety. A poorly designed scraper can cause discomfort, fear, or even minor injuries, turning grooming time into a battle. The China Pet Hair Scraper from Tallfly addresses these concerns head - on. Its rounded edges prevent scratches, allowing owners to glide the tool over their cat’s coat without hesitation. The Pet Hair Scraper’s focus on safety doesn’t sacrifice efficiency—each stroke efficiently captures loose fur, reducing shedding around the home while keeping your cat’s coat healthy. This attention to detail ensures even skittish cats can relax, as the scraper’s gentle touch mirrors the soothing motions of natural feline self - grooming. Creating a calm environment is key to successful grooming, and the scraper’s design aligns with this philosophy. Start by letting your cat sniff and explore the tool, building familiarity. Begin in less sensitive areas like the back or sides, using light strokes to acclimate them to the sensation. Avoid delicate zones like the face, ears, and belly to prevent irritation—this mindful approach keeps stress levels low. If your cat shows signs of discomfort, pause and try again later; patience is vital. After each session, reward cooperation with treats or playtime, reinforcing positive associations. Regular cleaning of the scraper maintains hygiene, ensuring every use is as fresh and safe as the first. Beyond individual pet owners, Tallfly understands the broader needs of the pet industry. As the demand for specialized cat grooming tools grows, brands and businesses seek reliable partners. Tallfly’s factory - direct approach means the scraper is not only lightweight and efficient but also adaptable. Custom options and bulk production capabilities empower brands to meet market demands, whether for boutique pet stores or large - scale distributors. This flexibility ensures that every cat, from pedigree breeds to rescue kitties, has access to a grooming tool that prioritizes their well - being. In a world where pets are cherished family members, investing in tools that make care routines seamless and stress - free is essential. The thoughtfulness behind a China Pet Hair Scraper—from safety features to user - centered design—reflects a commitment to both feline health and owner peace of mind. For those ready to upgrade their cat grooming game, explore the innovation and care packed into every tool at www.tallfly.net . Here, quality meets compassion, ensuring every grooming session is a win for cats and their humans alike.  
×
×
  • Créer...