Aller au contenu
Règlement du forum ×
IPTV et arnaques ×

SNR margin trop bas


Odin91

Messages recommandés

salut, mon SNR margin est trop bas ( en moyenne entre 5 et 7 ) et me cause donc plusieurs pertes de synchronisation.

 

comment exposer le problème à AT ? sachant que ces incompétents sont venus chez moi pour un dérangement après 3 mois à signaler mon problème ce qui restera une tache très difficile de les faire revenir. j'avais remarqué que le boitier dehors n'avait pas de cache et donc pendant une période de pluie mon SNR baisse carrément à -0.

Lien vers le commentaire
Partager sur d’autres sites

  • Modérateurs

c'est ça le probleme avec eux, ils achetent des boitiers etanches pour finalement les laisser ouverts et exposés a l'humidité qui finira par corroder les fils de cuivre, c'est vraiment une bande de trolls

la solution:

monte dans le poteaux , tu repére ta paire de cuivre, tu coupes, tu denudes les fils a nouveau, tu refait le branchement, c'est aussi simple que ça, n'attends rien des agents d'AT, ils ont pas encore pigé que le cuivre n'aime pas l'eau

Lien vers le commentaire
Partager sur d’autres sites

Bonjour, tout le monde a ce probleme, mais je vous déconseil de toucher au boitier par vous meme, car kach mayasra chez un voisin, AT vs accusera d'avoir touché a un equipement commun qui est leur proprieté, ca paut aller jusqua la justice.

 

La solution, faut s'armer de patience et perceverance et trouver wahad jeune iban fahem ?

 

Ana perso drabt enah, mais contrairement a vous, nhar echta itih snr margin mais pas au point de se deconnecter.

Lien vers le commentaire
Partager sur d’autres sites

tu as le meme probleme que moi lol on est sur le meme bateau :semi-twins: ils sont venus voir le probleme puisque j'avais pas de tonalité et avec un SNR comme toi qui baisse parfois a -5 et un redemarrage de modem mais les CONS ne savent meme pas de quoi s'agit car la ce qu'ils ont a faire c'est uniquement retablir la tonalité ni plus ni moins ! d'aprés ce que le téchnicien dit hahahah je lui y montré sur mon modem que il faut regler le probleme qui est au niveau de ma paire téléphonique ou la chambre sous terrain et comme vous le savez cette derniere et souvent remplite d'eau et abondonnée ce qui provoque la perte du cable qui est noyé dans l'eau avec le temps ! et aprés une longue attente ce matin il me disait tu as un probleme au niveau du transport ! je ne sais s'il sait ce qu'il dit ou c'est du n'importe quoi on attend tout de ces CONS ! on verra demain ce qu'il vont faire est ce il s'agit de cable sous terrain ou un changement de transport que je ne sais meme pas c'est quoi lol

Modifié par algérien_dz
Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

  • Messages

    • Comparing Stainless Steel and Plastic Shower Drain China Options When it comes to selecting a shower drain, choosing the right material is essential for performance, durability, and aesthetic appeal. In the market of Shower Drain China , two of the most popular options are stainless steel and plastic. Each material offers unique advantages and considerations, making it important to understand their differences before making a decision. Material Properties and Advantages   Feature Stainless Steel Shower Drain Plastic Shower Drain Durability Highly durable and resistant to corrosion Lightweight but less durable over time Corrosion Resistance Excellent resistance, ideal for wet environments Generally resistant but can degrade under harsh chemicals Maintenance Easy to clean and maintain surface shine May require more frequent cleaning due to scratches or discoloration Weight Heavier, providing a sturdy feel Very lightweight, easy to handle and install Cost Typically higher upfront cost More affordable and budget-friendly Aesthetic Appeal Sleek, modern metallic finish Available in various colors but less premium appearance Installation Requires careful handling due to weight Easy to install and replace Which Material Is Best for Your Shower Drain? Stainless Steel: Ideal for commercial bathrooms, luxury residences, and places where durability and design are priorities. Its robust nature and resistance to rust ensure long-term performance. Plastic: Suitable for budget-conscious projects or locations with lighter use, such as residential bathrooms with less heavy foot traffic. Plastic drains offer versatility and cost savings. Considerations for Buyers Longevity vs. Budget: Stainless steel drains often justify their higher cost with a longer lifespan and less frequent replacement. Plastic drains are cost-effective but may need replacement sooner. Environmental Impact: Stainless steel is recyclable, while plastic drainage components may contribute to environmental waste if not properly recycled. Maintenance Preferences: Stainless steel drains resist staining and are easier to keep clean. Plastic may show wear and discoloration faster. Why Choose Hasen-home for Your Shower Drain China Needs? At Hasen-home, we manufacture high-quality Shower Drain China products in both stainless steel and plastic varieties to suit diverse customer needs. Our products combine durability, functionality, and design excellence to meet international standards. With rigorous quality control and reliable service, Hasen-home is your trusted partner for drainage solutions. Explore our full range at https://www.hasen-home.com .
    • Is Anionic Polyacrylamide Emulsion the Key to Better Dye Removal? Textile wastewater treatment is a growing concern for industries seeking both environmental compliance and operational efficiency. One major challenge is removing synthetic dyes that resist conventional treatment. Can anionic polyacrylamide emulsion be the key to achieving clean and color-free effluent? Why Is Textile Wastewater So Complex? Wastewater from textile processes often contains large amounts of reactive and acid dyes, surfactants, sizing agents, and suspended solids. These substances not only give the water a strong color but also raise chemical oxygen demand and affect biological treatment efficiency. Traditional chemical coagulants may struggle to address such complexity without secondary impacts like excessive sludge generation. How Does Anionic Polyacrylamide Emulsion Work? Anionic polyacrylamide emulsion carries a negative charge, allowing it to interact with positively charged dye molecules and other particles in the wastewater. This interaction causes fine particles to aggregate into larger flocs, which then settle more easily. The emulsion form dissolves faster and more uniformly than powder products, making it highly suitable for continuous dosing systems. In textile wastewater treatment, this emulsion can be applied at several stages including pretreatment, coagulation, clarification, and sludge handling. It enhances dye removal, improves solid-liquid separation, and ultimately increases the clarity of discharged water. Where Is It Most Effective? In real-world applications, anionic polyacrylamide emulsion is effective in the following areas: Pretreatment where it supports the initial destabilization of dye molecules Coagulation-flocculation to build strong and fast-settling flocs Sedimentation to improve water clarity by accelerating the settling process Sludge dewatering to reduce water content and minimize disposal costs This versatility makes it a preferred choice for textile manufacturers aiming to improve wastewater quality and system efficiency. What Benefits Can You Expect? Users of anionic polyacrylamide emulsion often report: Faster and more complete dye removal Lower chemical consumption and cost Better sludge characteristics for easier handling Reduced environmental footprint due to improved water recycling Its broad pH compatibility and strong performance in high-color wastewater make it a reliable tool in textile operations. Choose Polyacrylamidefactory for Proven Performance If your factory is looking for a dependable solution to difficult dye removal challenges, Polyacrylamidefactory offers tailored anionic polyacrylamide emulsion products engineered for textile wastewater treatment. Our formulations are designed to deliver rapid flocculation, superior settling, and reduced sludge generation, all while helping your plant meet environmental standards. With years of industry experience and technical support, Polyacrylamidefactory ensures that your wastewater treatment process is both efficient and sustainable. Partner with us for performance you can trust. Learn more and contact us athttps://www.polyacrylamidefactory.com
    • le tutoriel que je vous ai envoyé a-t-il fonctionné sur votre matériel ?
    • je suis sur le cloudflare dns et je n’ai pas ce problème.
×
×
  • Créer...